Spares & Repairs

Cone to fit any Ranger® base, with a cone aperture of 2.5" (6cm). Cone length c. 6" (15cm).

Including 4x shaper bars, 4x screws, 4 x nuts, 1 x 4" lampholder, and base ring.

Can be used for ES fitting lamps, actinic straight and ring tubes, and vane units.


For more detail please see our main Ranger® page HERE


Related products:

Cone to fit any Ranger® base, with a cone aperture of 4" (10cm). Cone length c. 4" (10cm).

Including 4x shaper bars, 4x screws, 4 x nuts and 1 x 4" lampholder.

Can be used for ES fitting lamps, actinic straight and ring tubes, and vane units.


For more detail please see our main Ranger ® page HERE


Related products:

Cone to fit any Ranger® base, with a cone aperture of 2.5" (6cm).Cone length c. 6" (15cm).

Including 4x shaper bars, 4x screws, 4 x nuts, 1 x 4" lampholder, and base ring.

Can be used for ES fitting lamps, actinic straight (vertically mounted, optional steady bar required), and vane units.

For more detail please see our main Ranger ® page HERE


Related products:

Cone to fit any Ranger® base, with a cone aperture of 4" (10cm). Cone length c. 4" (10cm).

Including 4x shaper bars, 4x screws, 4 x nuts and 1 x 4" lampholder.

Can be used for ES fitting lamps, actinic straight (vertically mounted, optional steady bar required), and vane units.

For more detail please see our main Ranger ® page HERE


Related products:

Cone to fit any Ranger® base, with a cone aperture of 2.5" (6cm). Cone length c. 6" (15cm).

Including 4x shaper bars, 4x screws, 4 x nuts, and base ring.

Can be used for actinic ring tubes, and vane units.

For more detail please see our main Ranger ® page HERE


Related products:

Cone to fit any Ranger® base, with a cone aperture of 4" (10cm). Cone length c. 4" (10cm).

Including 4x shaper bars, 4x screws, 4 x nuts, and base ring.

Can be used for actinic ring tubes, and vane units.

For more detail please see our main Ranger ® page HERE


Related products:

Single steady bar and hole blanking plug; plus all the relevant fittings to attach to your existing Ranger® Multi or Plain cone.

(photograph for illustration purposes only - lamp, cone & ranger base not included)

2 x steady bars, 2 extender rods with anchors, hole blanking plug; plus all the relevant fittings to attach to your existing Ranger® Multi or Plain cone.

(photograph for illustration purposes only - lamp, cone & ranger base not included)

Standard Ranger® net base unit. Uses 25cm legs - not included.

NOTE: If you are replacing an existing Ranger® base unit and already have the base unit legs, please check the leg length before re-ordering. Most models prior to 2012 use 22.5cm legs which you will need to replace if buying a new Ranger® base unit.

(photograph for illustration purposes only - base unit legs not included).



Related products:

2 x threaded rod legs with notched tips to fit Ranger® or Safari® base

Old length rods with threaded bar length (excluding notched tips) of 22.5cm

To fit all traps sold prior to 2012, and some 2012 models.
PLEASE CHECK LEG LENGTH BEFORE PURCHASING.

(please note, 4 legs illustrated, you will receive 2 only)

2 x threaded rod legs with notched tips to fit Ranger® or Safari® base

New length rods with threaded bar length (excluding notched tips) of 25cm

To fit most traps sold from 2012 onwards.
PLEASE CHECK LEG LENGTH BEFORE PURCHASING.

(please note, 4 legs illustrated, you will receive 2 only)

4" (10cm) 38mm lampholder ring to suit Safari® or Ranger® Multi or Plain Cones

Steady bar and hole blanking plug, plus additional base unit leg.
(leg not shown in picture)

To fit any standard Ranger® base.
Using a rainshield may help to extend the life of your actinic tube.

This item includes the plastic rainshield, plus 4 x rainshield legs (legs inc. 8 x anchors, 8 x screws and 4 x washers).

Please note that the rainshield is not suitable for use with the Safari trap.

(photograph for illustration purposes only - actinic ringtube, cone & ranger base not included)

To fit any standard Ranger® base.
Using a rainshield may help to extend the life of your actinic tube.

This is for the plastic rainshield, the rainshield legs are not included.

Please note that the rainshield is not suitable for use with the Safari trap.

(photograph for illustration purposes only - actinic ringtube, cone, rainshield legs, & ranger base not included)

Set of 2 x Ranger® rainshield legs (inc. 4 x anchors, 4 x screws and 2 x washers).

PLEASE NOTE: 4 legs are illustrated, you will receive 2 legs only. If you need a complete set of legs for a rainshield, you will need to buy two packs. Alternatively purchase our Rainshield and Legs item.


Related products:

Two wire steel tent pegs which can be used to ground tether our Safari® or Ranger® moth traps. Also handy spares for your Insectopia tent cage.

Please note, product may vary in style from that illustrated.